CAMBER ARM KIT
RELEASE OF LIABILITY AND PRODUCT WARRANTY
READ CAREFULLY – THIS AFFECTS YOUR LEGAL RIGHTS
By installing or using this product, you understand and agree with the following: If you do not agree, do not proceed with the installation and return this product within 30 days for a full refund of the purchase price from the company from which you have purchased it.
- I understand and agree that this product is intended to be installed for use on private roads and in jurisdictions where the use of this product is deemed legal by the local authorities. Furthermore, I understand and agree Unplugged Performance does not have any knowledge or control of regulations in my local jurisdiction, and it is up to me to determine if the product is acceptable for use with my vehicle.
- I understand that Unplugged Performance has done testing of this product on road and on closed racetracks but does not have the ability to test the vehicle for localized standards and regulations.
- I understand and agree that if the vehicle manufacturer determines that any Unplugged Performance products have contributed to a problem with the vehicle it may affect the vehicle’s warranty. Furthermore, I understand and agree that Unplugged Performance has no duty nor ability to be involved in internal manufacturer decisions.
- I understand and agree that if this product is given to an installer for installation on my vehicle, I have read and agreed with all the previous, even if I am not personally installing these parts on my vehicle. Furthermore, I understand and agree that this product should be installed by a trained professional that is familiar with both the vehicle as well as this product. Furthermore, I understand and agree that I and/or my chosen installer will follow the installation instructions carefully and dutifully test the vehicle post-installation in a safe and controlled environment to ensure proper operation.
- I understand and agree that by installing this product Unplugged Performance and all associated persons and entities as well as the vehicle manufacturer and all associated entities must be held harmless in the event of any suit, damages, or other legal action. Furthermore, I hereby release Unplugged Performance and any associated entities from any and all liability for any potential claim or claims.
If you do not agree with any of the above statements, you should return the product immediately. For more information please see our Terms and Conditions.
PLEASE NOTE:
The vehicle must be lifted completely off of the ground and remain as such during the entire installation process.
CONTENTS LIST:
- 2 MODEL S CAMBER ARMS
TOOL LIST:
- 21mm SOCKET
- 21mm WRENCH
- 10mm SOCKET
REMOVING FACTORY UPPER SUSPENSION ARM
Begin my removing leveling sensor followed by both 21mm bolts labeled 1 and 2 on Figure 1. Please remove the bolts in that order but do not take out the arm until leveling sensor has been removed to prevent damage.
Remove 10mm bolt securing height level sensor holder to factory arm as shown in Figure 2.
INSTALLING UNPLUGGED CAMBER ARM
Prior to installing, ensure arm is set to factory length by putting a bolt in each side with factory arm. The bolts should go in freely with no tension. Install height level sensor holder to Unplugged arm.
Reinstall arm in the orientation as seen above. The turnbuckle should be outboard with the Unplugged logo upright and the height level sensor holder at the bottom. Insert arm and ensure both bolts are in prior to torquing down. Reinstall height level sensor arm onto holder.
TORQUE SPECS:
- HEIGHT LEVEL SENSOR HOLDER: 5FT-LBS
- OUTBOARD 15mm BOLT: 103 FT-LBS
- INBOARD 18MM BOLT: 95 FT-LBS
PLEASE CALL UNPLUGGED PERFORMANCE IF YOU HAVE ANY QUESTIONS OR REQUIRE FURTHER ASSISTANCE. PLEASE DO NOT MODIFY ANY COMPONENTS DURING INSTALL WITHOUT CONTACTING UNPLUGGED PERFORMANCE.
