What is the best way to get serious ground clearance on a Model Y?

Question

Unplugged Performance · Accepted Answer

For a road-driven Model Y, this Stage 3 package is the top of Unplugged Performance's ladder. It pairs Dirt & Snow Coilovers, which add usable stroke and up to 2 inches of ride-height adjustment, with a +35mm Leveling Lift Kit that raises the chassis about 1.5 inches and reduces factory rake. If you want less lift, Stage 2 Trailhead Pro is the tier below. Stage 3 gives true ultra-high clearance and longer suspension travel, and its geometry tools keep the car precise on the street, so the height comes with real handling control behind it.

Q: What is the best way to get serious ground clearance on a Model Y?

Will installing these make the car noisier?

Do I still need an alignment after fitting these?

Camber arms or toe arms first for a Model S with worn rear tires?

What are these camber arms made of?

How long has Unplugged Performance been making these?

What warranty and price come with these?

Will a race coilover set void my Tesla warranty?

How much lighter are these than the stock arms?

What keeps the spherical bearings from wearing out on a daily driver?

Do rigid bearings make the car louder or harsher?

Can I buy just the traction arms or just the trailing arms?

How is this different from just adding a strut brace or sway bar?

What warranty comes with these arms?

What is this ball joint replacement for?

Does this fit my Model 3 or Model Y specifically?

Is this priced per side or per pair?

How do I know when my FUCA ball joint needs replacing?

Why do track drivers keep a spare ball joint on hand?

Can I replace this ball joint myself?

Do I have to replace the whole control arm, or just this joint?

If I do not own the UP FUCA set yet, what should I look at?

How low can a Model Y go on these compared to normal lowering springs?

Will these hold up on the street, or are sealed bearings only for track cars?

Do these actually help alignment hold, or just handling?

How hard is this to install?

Sealed spherical bushings versus upgraded rubber or poly, which is better?

Will this make my Model S or Model X ride harshly?

Does this bushing kit affect my Tesla warranty?

What does a rear toe arm do on a Tesla Model S?

Does this rear toe arm set fit a 2015 Model X?

Will these work on a 2021 Model S Plaid?

Why would I need adjustable toe arms after lowering my Model S?

Are these worth it for a car that mostly sees track days?

Do I really need an alignment rack after fitting these toe arms?

Toe arms or camber arms, which should I buy first for tire wear?

What are these toe arms made of?

Could these adjustable arms cause trouble with a warranty claim later?

Is this a lifetime part or something I replace regularly?

How is this installed and can your shop do it?

What is this cooler made of and how is it finished?

Enduro cooler versus just changing the factory filter more often, what is the difference?

Will this help my drive unit last longer?

Why ‘Pikes Peak Spec’ in the name, does it actually mean anything?

Adjustable spherical links versus stock rubber ones, which should I run?

Will adding these void my Tesla warranty?

Is the Front Lower Control Arm Spherical Bushing Set still available for the Model 3 and Model Y?

What did this bushing set actually do on a Model 3 or Model Y?

Why was it discontinued, and what should I run instead?

Can I still source one of these bushing sets used?

What does a sway bar end link even do, and why upgrade it?

Do these end links fit both the older Model 3 and the 2024+ Highland?

Will these work with my stock sway bar, or do I need aftermarket bars too?

How much adjustment range do these give front and rear?

How hard is it to install these end links at home?

Do I need these if I just lowered my Model Y?

What else should I adjust when I fit these end links?

What are these made of, and how long do they hold up?

Will lowering my Model Y 0.7 inch hurt range or ground clearance?

Does adding this suspension kit void my Tesla warranty?

How do I get a flush stance on my Model Y without buying new wheels?

How much does the Perfect Flush kit lower a Model Y?

Why does the Model Y specifically need a kit like this?

What do dual-rate springs actually do differently?

Why are adjustable camber arms part of a lowering kit?

Do the spacers cause vibration or fit issues?

Does the Perfect Flush kit fit the 2026 Model Y Juniper?

Can Unplugged Performance install the Perfect Flush kit?

Flush fitment kit or coilovers, which is right for me?

Will this kit work if I upgrade to aftermarket wheels later?

What is the best Model Y suspension upgrade if I just want a smoother, quieter ride?

How much does the Luxury Comfort+ kit lower a Model Y?

Can I still daily drive it and road trip comfortably?

How much clearance do the Dirt and Snow Coilovers give me?

How much does the Stage 3 package lift the car?

Does Stage 3 fit the 2026 Juniper Model Y and the older one?

What is in the Stage 3 package that Stage 2 does not have?

How does the Leveling Lift Kit mount, and does it require cutting?

Why does this package need so much alignment attention?

Can I install Stage 3 myself, or does it have to go to a shop?