This Pearl White Tesla Model 3 Performance Highland shows how: 18-inch UP-03 forged wheels, a substantial 10.5-inch width at all four corners, and a lowered stance gives the car a new look.
Underneath the car, the Unplugged Performance Front Upper Control Arms and our Stage 1 “The Essentials” Suspension Package provide the supporting adjustment needed to make this build come to life. For owners considering wider wheels on their Model 3, this build illustrates why wheel dimensions, ride height, and alignment can belong in the same conversation.
The Build: 18×10.5 +40 at All Four Corners
This Model 3 Performance features the following upgrades:
- UP-03 Forged Wheels:5 +40 front and rear.
- UP Adjustable Front Upper Control Arms: Added front alignment adjustment.
- Stage 1 “The Essentials” Suspension Package: Adjustable front and rear sway bars, Dual Rate Moderate Height Lowering Springs, and Billet Adjustable Rear Camber Arms.
Why Go Wider on a Model 3?
A wider wheel opens the door to wider tire options, giving owners more scope to tailor the car to their driving goals. With an appropriately matched tire, that additional wheel width supports a performance-focused setup for drivers who want to explore more of the Model 3’s cornering capability.
Front Upper Control Arms: Adding Alignment Flexibility
This build includes UP Adjustable Front Upper Control Arms alongside the Essentials package.
Their role is especially relevant when combining wider wheels with a lower ride height. Adjustable front upper control arms provide the ability to dial in front camber, helping the alignment technician establish a setup appropriate for the car’s fitment and driving demands.
The Essentials Suspension Package Behind the Stance
Our Tesla Model 3 Stage 1 “The Essentials” Suspension Package combines three complementary upgrades: lowering springs, adjustable sway bars, and adjustable rear camber arms.
Dual Rate Lowering Springs
The UP Dual Rate Lowering Springs bring the body closer to the wheels and establish the lowered stance seen in this build.
Their design uses two engineered linear spring rates to balance everyday ride comfort with increased support during more demanding driving. Multiple spring configurations allow owners to choose a ride height and calibration suited to their priorities.
Adjustable Front and Rear Sway Bars
The adjustable sway bars add another dimension to the package by controlling body roll and allowing the car’s handling balance to be tuned.
Developed with Randy Pobst, the UP bars offer three adjustment positions at each axle. These settings give owners flexibility to refine the chassis response around their tires, roads, and driving preferences. Polyurethane bushings are included.
Model-specific sets are available for 2017–2023 Model 3 and 2024+ Model 3.
Billet Adjustable Rear Camber Arms
Lowering changes suspension geometry, making rear alignment adjustment an essential consideration in the finished setup.
The UP Billet Adjustable Rear Camber Arms provide adjustment to dial in rear camber after the ride height has been established. CNC-machined 6061-T6 aluminum construction and sealed bearings support precise alignment control with street-friendly operation.
Together with the front upper control arms, they give the installer adjustment at both ends of the car. A complete alignment, including appropriate toe settings, helps balance handling goals with tire wear.
Build Your Model 3 Around the Whole Setup
This Model 3 Performance makes a compelling case for other people to consider getting the 18×10.5-inch squared fitment on their car. The stance is aggressive, the UP-03 design suits the Highland’s proportions, and the supporting suspension components give the build room for meaningful adjustment.
If you’re interested in a build like this, our team is available to assist.















