Tesla Model 3 Performance 2024+ Signature Carbon Aero Kit

Four coordinated carbon pieces. You get the Front Lip Cover and the CFD-validated Efficiency Rear Spoiler, paired with the Aero Mirror Covers and the Rear Diffuser Trim. It is built to unify the nose, mirrors and tail of a 2024+ Model 3 Performance into one carbon theme without buying each piece separately. Two of the four parts carry real aero function, the mirrors and the spoiler. The other two complete the look.

The kit as a whole is built for the 2024+ Model 3 Performance, but fitment varies by piece. The Front Lip Cover suits the Performance bumper only, and the Rear Diffuser Trim is Performance-only. The Efficiency Rear Spoiler fits all 2024+ Model 3 trims, and the Aero Mirror Covers fit 2024+ Highland and Performance but not the 2017 to 2023 Model 3. Buy the bundle for a Performance car and every piece lands correctly.

The Efficiency Rear Spoiler was developed through 143 CFD-driven simulations to delay flow separation, cut drag, and add rear stability. The Aero Mirror Covers carry CFD-tested vortex generators along the inner edge to encourage airflow attachment and reduce local turbulence. Those two are the functional aero. The Lip Cover and Diffuser Trim are styling pieces that respect Tesla’s low-drag geometry rather than change it.

Every component uses autoclave-cured prepreg carbon over a proprietary kevlar backing layer. That kevlar ply lifts stiffness-to-weight and shrugs off impacts far better than a common wet-lay panel. In plain terms, the pieces are lighter and hold up better to road life. It is the same construction philosophy used across the UP carbon line.

No drilling on any of the four pieces. They install with supplied adhesive and hardware where applicable, and each is engineered to integrate with Tesla’s factory geometry. We still recommend professional installation for the best alignment and surface prep. The mirror covers in particular use an interlocking fit that rewards a careful first install.

Structural fitment and function are backed for five years to the original owner. The base coat is the exception. It arrives as a raw layer ready for professional clear coat or PPF, so appearance issues like UV fade and chips sit outside coverage. Seal it early and the carbon beneath stays warranted for the long haul.

The base coat displays the weave and is meant to be sealed, not left bare long term. Unprotected, it can fade or discolor under UV, and that cosmetic degradation sits outside warranty coverage. Add professional clear coat or paint protection film and the finish is preserved. Think of the base coat as a starting layer, ready for the protection step.

A sharper front profile from the Lip Cover, steadier high-speed tracking and less drag from the Efficiency Spoiler, subtle mirror-level airflow refinement from the vortex generators, and a visually lower, wider rear from the Diffuser Trim. The stability gains come from the two functional pieces. The lightweight carbon construction also avoids adding meaningful mass. It looks composed because it is composed.

Yes. The Rear Diffuser Trim pairs with UP rear pieces like the Ascension-R rear wing and the carbon fiber side skirts for a fully coordinated build. The Signature kit is a strong foundation, and the rest of the carbon lineup bolts onto that theme. Start here, then add downforce and coverage as you go.

Unplugged Performance offers a comprehensive warranty on all parts and installations performed by our certified technicians. Warranty coverage applies to defects in materials and workmanship on items including lowering springs, coilovers, big brake kits, brake pads, stainless steel brake lines, shocks, and more. Should any covered part fail under normal use or display premature wear, we will repair or replace it at no additional cost—assuming the component was installed by us or at one of our authorized partners.

This warranty is valid for 2 years or 24,000 miles, whichever comes first, excluding consumable products like brake pads, rotors, and tires, starting from the installation date. Coverage extends to labor for warranty repairs when performed by Unplugged Performance or an authorized installer. It does not cover damage resulting from misuse, accidents, off‑road use, improper installation not done by us, or modifications that aren’t factory-approved.

To file a warranty claim, simply contact our service team. We’ll guide you through inspection, shipping (if needed), and repair or replacement logistics. transparencia and top-tier support are what you can expect from Unplugged.

Installing aftermarket parts does not automatically void your Tesla warranty. Under the Magnusson-Moss Warranty Act (www.sema.org/sema-enews/2011/01/ftc-validates-right-to-install-aftermarket-parts), a manufacturer cannot void your warranty simply because you installed aftermarket parts. Tesla must prove that the aftermarket part caused the specific failure in question to deny a warranty claim. UP recommends retaining all factory parts to allow reverting to stock if needed. 

Unplugged Performance processes orders quickly, typically within 1–2 business days after placement. For U.S. customers, orders under $50 usually ship via FedEx SmartPost with an estimated delivery time of 2–7 business days. Larger items like body kits or bumpers may ship via freight carriers with curbside delivery; customers will be contacted to schedule a delivery window. International shipping is available to most countries, with shipping costs calculated at checkout. Delivery times abroad vary, generally ranging from 5 to 16 business days depending on destination. Import duties or taxes are the customer’s responsibility. To ensure a smooth shipping experience, provide accurate contact information during checkout. For specific questions or shipping quotes, Unplugged Performance’s support team is available to assist.